SPRAY CLEANING

Do you need a Material Safety Data Sheet? Our local partner will be glad to send the needed MSDS.

Neutral Cleaners: Liquid Products with Corrosion Protection

SurTec 001
Product Info 		Cleaner for all substrates, good cleaning effect without foam formation, high corrosion protection.
SurTec 005
Product Info 		Cleaner for iron and steel, high cleaning effect with very low foam formation and good corrosion protection; dosage possible via conductivity.
SurTec 005 OV
Product Info 		Liquid, neutral spray cleaner, produces temporary corrosion protection on the parts, fast demulsifying, sprayable above 30 °C, dosage according to conductivity is possible. Can also be used with hard water, suited for steel and iron parts; conditionally suited for aluminium and copper alloys.
SurTec 006
Product Info 		Cleaner providing temporary corrosion protection, fast demulsifying, sprayable above 30 °C, suitable for dosing via conductivity, suitable for hard water. For cleaning and passivation of iron parts in single and multi chamber spraying devices.
SurTec 010
Product Info 		Cleaner for iron and steel providing temporary corrosion protection, fast demulsifying, sprayable above room temeperature. Suitable for hard water, contains a biocide.
SurTec 011
Product Info 		Cleaner for iron and steel and some types of aluminium and zinc, very good cleaning effect with low foam formation and excellent corrosion protection.

Compounded Products: Powdery and Liquid Cleaners

SurTec 115
Product Info 		Liquid, alkaline, silicate free spray cleaner for iron, stainless steel and magensium.
SurTec 130
Product Info 		Mildly alkaline, silicate free, powdery cleaner for steel and aluminium, high cleaning effect with low material attack.
SurTec 139
Product Info 		Powdery, alkaline, silicate based spray cleaner for all substrates, sprayable at 60 °C; aluminium, tin, rubber and plastics will not be attacked.
SurTec 142
Product Info 		Powdery, alkaline, silicate based cleaner for all substrates, product with a high dirt dispersion capacity.
SurTec 143
Product Info 		Liquid, alkaline, silicate containing spray cleaner, suitable for steel, aluminium, copper and brass. No attack on aluminium, rust protection on iron and steel without rinsing.
SurTec 174
Product Info 		Alkaline, silicate containing cleaner for all substrates; above all for the recycling of used engines.
SurTec 180
Product Info 		Highly alkaline spray cleaner, silicate free cleaner for iron and steel; also suitable for the etching of aluminium.
SurTec 182
Product Info 		Liquid, alkaline etch degreaser, which even removes strong adherent lubricants and films. SurTec 182 A has a cleaning and emulsifying effect whereas SurTec 182 B regulates the material removal. Graphite streaks and Trowalisier-machined small parts, which are usually finished with a temporary corrosion protection are optimally activated for the adhesion promoters.

SPRAYABLE IMMERSION CLEANING

Do you need a Material Safety Data Sheet? Our local partner will be glad to send the needed MSDS.

SFT-Cleaners: Cleaners for Immersion, Ultrasound, Spray and Injection Flood Washing Machines

SurTec 042
Product Info 		Liquid sprayable immersion cleaner for iron and steel, conditionally suitable for magnesium (depending on the alloy composition), with temporary corrosion protection.
SurTec 085
Product Info 		Recyclable tenside component for spraying and soak cleaning, foam reduced above 50 °C, extremly effective combination of surfactants.
SurTec 101
Product Info 		Liquid sprayable immersion cleaner for iron, steel, copper and brass, aluminium and zinc, partially suitable for magnesium. Quickly demulsifying, with temporary corrosion protection.

IMMERSION CLEANING WITH AND WITHOUT ULTRASOUND

Do you need a Material Safety Data Sheet? Our local partner will be glad to send the needed MSDS.

Ultrasonic Cleaners: Powdery and Liquid Products with and without Corrosion Protection

SurTec 025
Product Info 		Liquid, acidic, builder concentrate, free of surfactants, removes oxide impurities without any problems, brightens copper and brass. Suitable for ultrasonic application, suited for all kind of materials
SurTec 026
Product Info 		Liquid, acidic, emulsifying cleaner for the removal of polishing pastes and oxide layers, even from delicate material such as glass, plastic and lacquer.
SurTec 102
Product Info 		Liquid, silicate free cleaner for iron, steel, aluminium and zinc plated steel. Temporary corrosion protection after drying and quickly emulsifying.
SurTec 103
Product Info 		Liquid, mild alkaline, highly concentrated cleaner for the removal of polishing pastes from all substrates with very high corrosion protection by creating a hydrophobe film on the surface.
SurTec 104
Product Info 		Liquid, silicate free, emulsifying universal cleaner, especially suited for the removal of lapping and polishing pastes from all substrates; high temporary corrosion protection.
SurTec 104 U
Product Info 		Liquid universal cleaner, suitable for all materials. Very intense cleaning and degreasing, ideal for the removal of grinding and polishing paste. Generates an uniform hydrophobic layer for temporary corrosion protection which is removable by aqueous alkaline treatment, improves the corrosion protection also on aluminium and zinc.
SurTec 128
Product Info 		Liquid, highly alkaline, silicate free cleaner for iron, steel, magnesium and nickel; for soak cleaning, decarburisation and alkaline delacquering.
SurTec 133
Product Info 		Powdery, recyclable soak- and ultrasonic cleaner for every substrate, above all for the removal of lapping abrasives and polishing pastes from aluminium.

Compounded Products: Powders and Liquids for Fixed-Cycle and Continuous Operation

SurTec 151
Product Info 		Powdery, silicate based, emulsifying cleaner for all substrates; with high dirt dispersion capacity; above all for cleaning of aluminium and zinc dye cast.
SurTec 152
Product Info 		Powdery, weakly alkaline, silicate free, easy to rinse, aluminium might be slightly attacked with emulsifying properties. Suitable for ultrasonic application.
SurTec 156
Product Info 		Powdery, silicate free, demulsifying cleaner for iron and steel. Especially suited for the pretreatment in plating lines with oil skimmer.
SurTec 184
Product Info 		Powdery, highly akaline cleaner for hot degreasing of steel or iron materials, suited for immersion degreasing before enamelling and electroplating.
SurTec 188
Product Info 		Highly alkaline, powdery cleaner for soak cleaning and as an additive for the electrolytical cleaning, long service life.
SurTec 192
Product Info 		Liquid, alkaline cleaner concentrate, contains silicates, free of surfactants. Will be assembled with a base (NaOH, KOH) and surfactant to the ready bath, for hot and electrolytic degreasing. Ssuited for steel and iron parts, without base also suitable for brass, zinc die cast, aluminium and magnesium. In combination with SurTec 089 demulsifying and recyclable via membrane filtration, separator or gravitation oil separator, emulsifying in combination with SurTec 092 or SurTec 415. For spray application in combination with SurTec 084 and SurTec 086, in combination with SurTec 085 suitable for compact lines with pressure flooding.

Booster

SurTec 095
Product Info 		Liquid, concentrated surfactant booster, efficient removing of sealer-layers in highly alkaline cleaning baths, removes sealer residues very fast and dissolves them completely, very good solubility in highly concentrated alkaline baths, excellent degreasing properties, free of complexing agents.
SurTec 095 E
Product Info 		Liquid, emulsifying, concentrated surfactant booster, efficient removing of sealer-layers in highly alkaline cleaning baths, removes sealer residues very fast and dissolves them completely, very good solubility in highly concentrated alkaline baths, excellent degreasing properties, free of complexing agents.
SurTec 415
Product Info 		Liquid, emulsifying tenside booster with high oil receptivity for immersion application with and without ultrasound. Also for decarburising and phosphate removal.

RECYCLABLE CLEANERS

Do you need a Material Safety Data Sheet? Our local partner will be glad to send the needed MSDS.

Modular System: Builder for the Combination with the Adequate Tenside Components

SurTec 107
Product Info 		Liquid recyclable builder with corrosion resistance, free of silicates and surfactants, suitable for steel, etc.
SurTec 107 OV
Product Info 		Liquid, recyclable builder, free of silicates and surfactants. Recyclable in combination with SurTec 089 via membrane filtration, separator or gravitation oil separator, suitable for spraying, flooding or continuous lines in combination with SurTec 085, for spray application together with SurTec 084 or SurTec 086. Emulsifying in combination with SurTec 092 and SurTec 415. Suitable for steel, aluminium, brass etc.
SurTec 108
Product Info 		Liquid, alkaline recyclable builder with corrosion resistance, free of silicates and surfactants, suitable for iron, steel and magnesium, temporary corrosion resistance on iron and steel.
SurTec 131
Product Info 		Liquid, recyclable soak, ultrasonic and spray cleaner for steel, aluminium, brass etc.; neutral, especially for delicate material.
SurTec 131 OV
Product Info 		Liquid recyclable builder for soak-, ultrasonic- and spray cleaning, free of silicates and detergents. Recyclable in combination with SurTec 089 via cross-flow-filtration or separator, emulsifying in combination with SurTec 415, for spray application together with SurTec 084 or SurTec 086. Suitable for steel, aluminium, brass etc.
SurTec 132
Product Info 		Mildly, alkaline, recyclable builder for aluminium degreasing, suitable im combination with detergent boosters SurTec 085, SurTec 089 and SurTec 092
SurTec 134
Product Info 		Powdery, alkaline, silicate and surfactants free builder component for steel.
SurTec 136
Product Info 		Liquid, recyclable soak, ultrasonic and spray cleaner for steel, partly suitable for aluminium, brass and copper, highly alkaline.
SurTec 137
Product Info 		Powdery, alkaline, silicate free builder component for steel, ultrafiltratable.
SurTec 138
Product Info 		Liquid, recyclable soak, ultrasonic and spray cleaner for steel and magnesium, partly suitable for aluminium, brass and copper, highly alkaline.
SurTec 140
Product Info 		Liquid, mild alkaline, silicate free builder component for steel, aluminium and copper alloys; free from tensides.
SurTec 140 OV
Product Info 		Liquid, mild alkaline recyclable builder, free of silicates and surfactants. In combination with SurTec 089 recyclable via cross-flow-filtration or separator, emulsifying in combination with SurTec 415, for spray application together with SurTec 084 or SurTec 086. Suitable for steel, aluminium, brass etc.
SurTec 141
Product Info 		Liquid, alkaline, tenside free builder for steel, zinc and aluminium.
SurTec 147
Product Info 		Liquid, mildly alkaline, recyclable builder, free of borates, silicates and surfactants. In combination with demulsifying detergents from the SurTec range, recyclable via membrane filtration, separator or gravitation oil separator:
– with SurTec 089 for soak- and ultrasonic application
– with SurTec 085 for soak-, ultrasonic-, flood- and spray application
– with SurTec 084 and SurTec 086 for flood- and spray application
in combination with SurTec 415 or SurTec 092 emulsifying suitable for aluminium, non-ferrous metals and stainless steel.
SurTec 148
Product Info 		Liquid, weakly alkaline, recyclable builder, free of borates, silicates and surfactants. In combination with demulsifying detergents from the SurTec range, recyclable via membrane filtration, separator or gravitation oil separator:
– with SurTec 089 for soak- and ultrasonic application
– with SurTec 085 for soak-, ultrasonic-, flood- and spray application
– with SurTec 084 and SurTec 086 for flood- and spray application
in combination with SurTec 415 or SurTec 092 emulsifying suitable for steel, cast, stainless steel and copper.
SurTec 149
Product Info 		Liquid, alkaline, recyclable builder, free of borates, silicates and surfactants. In combination with demulsifying detergents from the SurTec range, recyclable via membrane filtration, separator or gravitation oil separator:
– with SurTec 089 for soak- and ultrasonic application
– with SurTec 085 for soak-, ultrasonic-, flood- and spray application
– with SurTec 084 and SurTec 086 for flood- and spray application
in combination with SurTec 415 or SurTec 092 emulsifying suitable for steel, cast, stainless steel and magnesium.
SurTec 168
Product Info 		Liquid, alkaline, silicate and detergent free cleaner for iron and steel in spray and continuous lines. Perfectly suited for fine cleaning of TV masks.
SurTec 178
Product Info 		Powdery, highly alkaline, silicate free builder component free of complexing agents.
SurTec 531
Product Info 		Liquid, organic builder providing temporary corrosion protection.

Modular System: Tenside Components for combination with builder or increasing of ready-made cleaner

SurTec 084
Product Info 		Liquid, highly concentrated, spray detergent booser for spray applications over the whole pH-range, sprayable already above 30 °C.
SurTec 085
Product Info 		Recyclable tenside component for spraying and soak cleaning, foam reduced above 50 °C, extremly effective combination of surfactants.
SurTec 086
Product Info 		Liquid, highly concentrated, demulsifying, recycable spray surfactant for spray applications over the whole pH-range, sprayable above 40 °C; highly effective detergent combination.
SurTec 088
Product Info 		Liquid, highly concentrated surfactant booster for shorter derusting times, free of inhibitors.
SurTec 089
Product Info 		Highly concentrated, liquid, recyclable detergent booster for immersion applications with and without ultrasound.
SurTec 091
Product Info 		Liquid, highly concentrated detergent booster for immersion or ultrasonic application.
SurTec 092
Product Info 		Highly emulsifying additive for alkaline, acidic and neutral degreasing baths; good oil absorption, highly concentrated for immersion application (e.g. in conbination with SurTec 132).

MEMBRANE CLEANERS

Do you need a Material Safety Data Sheet? Our local partner will be glad to send the needed MSDS.

EDTA-Free Products for Cleaning of Membranes Against Decrease of the Flux Rate

SurTec 941
Product Info 		Powdery, alkaline cleaner, free of hard complexing agents, suitable for all membranes, extraordinary high cleaning performance.
SurTec 942
Product Info 		Liquid, acidic cleaner without hard complexing agents, suitable for all membranes; especially for further increase of the flux rate after alkaline cleaning.
SurTec 943
Product Info 		Liquid, alkaline, free of silicates membrane cleaner, suited for micro and ultra filtration, suitable for all types of membranes.
SurTec 944
Product Info 		Liquid, alkaline, free of silicates membrane cleaner, suited for micro and ultra filtration, suitable for all types of membranes, free of hard complexing agents.

HIGH PRESSURE CLEANING

Do you need a Material Safety Data Sheet? Our local partner will be glad to send the needed MSDS.

Cleaners for High Pressure and Steam Jet Devices

SurTec 120
Product Info 		Liquid intensive cleaner for all materials, especially suitable for brush wash and high pressure systems.
SurTec 121
Product Info 		Liquid, alkaline, silicate based cleaner, preferably used for exterior cleaning of airplanes. No stress corrosion on metal, lacquer and plexiglass or Macrolon.
SurTec 123
Product Info 		Liquid, mildly alkaline, silicate free cleaner with good washing effect. Also applicable at high water hardness.
SurTec 124
Product Info 		Liquid, alkaline universal cleaner, for all metals, painting, porcelain, glass and floor surfaces, excellent as high pressure cleaner, approved as foam cleaner, ultrasonic adaptable.
SurTec 125
Product Info 		Liquid, highly concentrated, alkaline, high pressure and steam cleaner, suitable for iron, steel, aluminium and plastic.
SurTec 151
Product Info 		Powdery, mildly alkaline, silicate based cleaner for all substrates, product with high dirt dispersion capacity.
SurTec 155
Product Info 		Powdery, mildly alkaline cleaner, free of silicate or complexing agents, preferably used for careful exterior cleaning of vehicles.

ELECTROLYTICAL CLEANING

Do you need a Material Safety Data Sheet? Our local partner will be glad to send the needed MSDS.

Compounded Products: Powders and Liquids for Fixed-Cycle and Continuous Operation

SurTec 171
Product Info 		Powdery, electrolytical degreasing agent, highly alkaline, free of cyanides and free of EDTA and NTA, non foaming.
SurTec 177
Product Info 		Powdery, silicate based electrolytical cleaner for iron, steel and copper alloys; non foaming.
SurTec 179
Product Info 		Powdery, silicate based cleaner for soak cleaning and for electrolytical cleaning of iron and steel.
SurTec 190
Product Info 		Liquid, highly alkaline cleaner concentrate, can be applied as electrolytical cleaner for iron and steel parts, very high electrolytical conductivity, excellent cleaning results even in low current density areas, very good removal of pigment impurities, can be applied anodical or cathodical, free of EDTA, NTA and cyanides.
SurTec 197
Product Info 		Powdery, silicate free electrolytical cleaner for iron, steel and copper alloys; low-foaming formulation.
SurTec 198
Product Info 		Highly alkaline, silicate and amine free, liquid builder component for iron and copper alloys; especially suited for the cleaning of printing cylinders.
SurTec 199
Product Info 		Highly alkaline, silicate free liquid builder component of high conductivity; above all for cleaning of printing cylinders.

Modular System: Builders and Boosters for Electrolytical Cleaning

SurTec 194
Product Info 		Highly alkaline, silicate free, liquid builder component of high conductivity; optimum application in combination with SurTec 419.
SurTec 419
Product Info 		Liquid, weak complexing agent, free of EDTA/NTA, as additive for cleaning solutions, especially dephosphatising, with and without current.
SurTec 785
Product Info 		Powdery, EDTA/NTA free complexing agent as an additive for electrolytical cleaning and descaling baths. Very good complexing effect for copper and zinc.

COMPOUNDS & SPECIAL CLEANERS

Do you need a Material Safety Data Sheet? Our local partner will be glad to send the needed MSDS.

ALFECU®: Solid and Liquid Compounds for the Preparation of Cleaners

Alfecu 500 S
Product Info 		Silicate containing, powdery concentrate with stabilizers and good emulsifying properties for the preparation of immersion cleaners.
Alfecu 600 SF
Product Info 		Silicate free powder with excellent emulsifying properties for the preparation of highly emulsifying immersion cleaners.
Alfecu 700 SP
Product Info 		Silicate free powder with salts of organic acids, for the preparation of powdery, neutral or alkaline spray cleaners.

Special Cleaners

SurTec 046
Product Info 		Liquid, intensive cleaner for cloth, plastic, glass and sensitive laquers, especially for the cleaning of smoking areas.
SurTec 055
Product Info 		Liquid, intensive cleaner for cloth, plastic, glass and sensitive laquers, especially for the cleaning of smoking areas.
SurTec 122
Product Info 		Liquid, universal cleaner, suitable for exterior car cleaning, removes oil and grease completely, does not attack lacquers, metals and glass.
SurTec 410
Product Info 		Powdery, highly alkaline cleaner, especialy suited for removal of even strong phosphating layers before heat treatment, free of cyanides and silicates as well as free of EDTA and NTA. Suitable for iron and steel, can also be used for the removal of top coats.
SurTec 412
Product Info 		Liquid, high concentrated, Neutral Activator, removes rust and oxidic films at neutral pH-value, suitable for treatment after thermal deburring, cleaning and derusting in one work step, for ultra sonic immersion application. Suitable for all iron and steel materials, compatible with aluminium, free of hard complexing agents.
SurTec 412 SFT
Product Info 		Liquid, high concentrated Neutral Activator, removes rust and oxidic films at neutral pH-value, especially suited for treatment after thermal deburring, cleaning and derusting in one work step, for spray and flow application or for compact units with ultra sonic, > 50 °C foam reduced applicable. For all iron and steel materials, compatible with aluminium, free of hard complexing agents.
SurTec 413
Product Info 		Liquid, high concentrated Neutral Activator, degreases and removes rust and oxide layers at neutral pH-value, specially suited for treatment after thermal and chemical deburring. For all iron and steel materials, compatible with aluminium, free of hard complexing agents. In combination with e.g. SurTec 089 for ultra sonic immersion application, in combination with SurTec 086 sprayable, in combination with SurTec 085 suited for compact installations with pressure flooding and/or ultra sonic.
SurTec 472
Product Info 		Liquid, acid cleaner concentrate, free of surfactants, especially suitable to remove oxidic impurities from aluminium and non-ferrous metals.
SurTec 473
Product Info 		Liquid, acid cleaner, contains phosphoric acid, for stainless steel and aluminium surfaces; for outer surfaces of vehicles in use on tracks or streets.
SurTec 480
Product Info 		Liquid, acidic cleaner, used for cleaning and pickling of steel prior to hot dip galvanising, based on phosphoric and hydrochloric acid. Contains high performing surfactants for best degreasing efficiency and corrosion inhibitor, preventing unwanted attack on the bulk material.
SurTec 907
Product Info 		Window cleaner for manual and mechanical cleaning of window panes. Proven for the removal of insects from cockpit windows of airplanes.
SurTec 981
Product Info 		Liquid, additive for ball burnishing, high effective mixture of surfactants and organic acids, suitable for aluminum and brass.

DEFOAMERS AND RINSE AID

Do you need a Material Safety Data Sheet? Our local partner will be glad to send the needed MSDS.

SurTec 784
Product Info 		Liquid drying additive, free of inorganic salts, low make-up concentration, non hydrophobic, also applicable for stainless steel and electroplated surfaces.
SurTec 787
Product Info 		Liquid drying additive, free of inorganic salts, hydrophobic, also applicable for stainless steel and electroplated surfaces.
SurTec 902
Product Info 		Liquid, silicon free, antifoam agent, effective over the whole pH-range, also for waste water treatment. No negative effect on subsequent finishing as it is easily rinsed off.
SurTec 903
Product Info 		Liquid, silicon free, antifoam, especially for dispersions of organic polymers, active over the whole pH-range.
SurTec 905
Product Info 		Highly concentrated silicon antifoam agent; highly viscous but well flowing. SurTec 905 is used as a defoamer for waste water and must not be used prior to plating or lacquering.

WASTE WATER TREATMENT & RECYCLING

Do you need a Material Safety Data Sheet? Our local partner will be glad to send the needed MSDS.

SurTec 920
Product Info 		Highly efficient flocculation agent for waste water based on polyacrylamide arising during a metal finishing process, scales up the size of flocs and this improves the depositon of solids. A complete sedimentation of suspended particles up to fine-grained particles can be obtained.
SurTec 921
Product Info 		Precipitating agent used for the “precipitation” of heavy metals. The dissolved heavy metals are converted into water-insoluble chelate. In combination with a flocculation agent (e. g. SurTec 920) the waste water regulations can be observed strictly.
SurTec 930
Product Info 		Demulsifier for the continious oil separation in gravity deoilers, for waste water treatment and for the batchwise emulsion split af acidic and alkaline cleaning solutions.
SurTec 932
Product Info 		Liquid demulsifier for neutral and alkaline cleaning systems, which form stable emulsions with cooling lubricants, has a good defoaming effect, separates oil-water emulsions and cooling lubricant emulsions before the waste water treatment, suited for vibratory grinding, free of chlorides
SurTec 954
Product Info 		Liquid additive for water softening in industrial cleaning processes, precludes deposits caused by hard water, can be added to alkaline, neutral or acid cleaners.