Anti-Friction Coatings for Metal Applications

Anti-Friction Coatings protect metals from corrosion and wear. They are particularly suitable for applications exposed to extremely high or low temperatures and pressures, parts exposed to aggressive media, UV or X-ray radiation, or vacuum applications.  These special lubricants ensure a constant friction over the entire lifetime of e. g. magnetic anchors.

• PFAS free as needed to replace environmentally hazardous coatings
• Suitable for particularly high and low temperatures over a wide temperature range
• Reduction in friction and constant, low coefficients of friction
• Avoiding or reducing noise such as squeaking (no stick-slip)
• Improved emergency running properties
• Anti-Friction Coatings improve the inlet lubrication until a grease film/oil film is built up, for example
• Protection against corrosion and aggressive media
• Insensitive to dust, dirt and moisture
• No drip or evaporation losses and excellent bond strength

• Reliable, dry life lubrication without oil and grease that doesn’t need to be replaced
• Combination lubrication with oil and grease possible
• Extreme pressure resistance
• Simplified assembly
• Complete coverage of areas to be coated with a uniform, clean lubricant layer
• Fully lubricating even after long downtime
• Can be used in vacuum and aerospace
• Chemically-physically stable and radiation resistant
• Efficacy even at high sliding speeds