In the production of monobloc aerosol cans, the extrusion (forming) and cleaning process steps place the highest demands on the production aids used. The aim is to achieve a paintable can surface on both recycled and virgin aluminum. Our innovative and perfectly matched combination of lubricant and cleaner offers maximum performance and sustainable process control at the same time.
Minimal material attack reduces maintenance costs and downtimes.
High cleaning performance with minimal use of energy and water. Foam-free formulation - usually no additional defoamer required.
Simple process control through control and dosing via the conductivity value.
✔ Achieve the highest cleaning results
(≥ 56 mN/m) even under bath load with lubricants
✔ Can be used at temperatures as low as 50°C
✔ Reduce the amount of rinsing water required by up to 25%
✔ Avoid sludge formation
✔ Are compatible with standard coating systems (e.g. epoxy, BPA-NI)
✔ Have references in Europe, Asia, Africa and America
✔ Highest lubricating effect under high pressure
✔ Excellent adhesion with low consumption
✔ Can be removed without residue in the cleaning process
Formulation free from alcohols, solvents and heavy metals
Direct use in the tumbler or circular vibrator without prior preparation
